I will provide a concise introduction to the article “Fixing Crackling and Static Noise on AirPods Pro (Gen 1 & 2)” without using an exclamation mark or phrases like “This article” or “In this article.” Here’s the introduction:
Experiencing crackling and static noise on your AirPods Pro? Here’s how I tackled and resolved the issue on both Gen 1 and Gen 2 models.
Checking and Updating Device and AirPods Firmware
Checking and updating the firmware of your AirPods Pro (Gen 1 & 2) and device can help resolve crackling and static noise issues. To do this:
1. Ensure that your AirPods Pro are connected to your device.
2. Open the Settings app on your iPhone or iPad.
3. Scroll down and tap “Bluetooth.”
4. Locate your AirPods Pro in the list of connected devices and tap the “i” icon next to them.
5. If an update is available, you will see a “Firmware Version” section. Tap “Install” to update the firmware.
6. Keep your AirPods Pro connected and near your device during the update process.
7. Once the update is complete, check if the crackling and static noise issue has been resolved.
Resetting and Reconnecting Procedures
Resetting and reconnecting your AirPods Pro can help fix crackling and static noise issues. Here’s how to do it:
1. Start by placing both AirPods Pro into the charging case.
2. Close the lid of the charging case and wait for about 30 seconds.
3. Open the lid of the charging case and locate the small button on the back of the case.
4. Press and hold the button until the LED light on the front of the case starts flashing white.
5. Keep holding the button until the LED light turns amber and then white again.
6. Release the button and your AirPods Pro will be reset.
7. Now, on your iOS device, go to Settings > Bluetooth and forget your AirPods Pro.
8. Place the AirPods Pro back into the charging case and close the lid.
9. Wait for a few seconds, then open the lid and follow the on-screen instructions to reconnect your AirPods Pro.
Hopefully, this reset and reconnect procedure will resolve any crackling or static noise issues you were experiencing with your AirPods Pro. If the problem persists, consider contacting Apple Support for further assistance.
Ensuring Proper Charging and Cleanliness
- Use the original charging cable and adapter to ensure proper charging.
- Clean the charging port of your AirPods Pro regularly with a soft, lint-free cloth.
- Avoid exposing your AirPods Pro to liquids as it can damage the internal components.
- Always fully charge your AirPods Pro before use.
- Keep your AirPods Pro in the charging case when not in use to protect them and maintain battery life.
- Avoid extreme temperatures as they can affect the performance of your AirPods Pro.
- Remove any dirt or debris from the mesh on the earbuds using a clean, dry brush or cotton swab.
- Regularly update your AirPods Pro firmware to ensure optimal performance.
- Avoid exposing your AirPods Pro to high humidity environments as it can cause damage.
- When not using your AirPods Pro for an extended period, store them in a clean, dry place to prevent dust or dirt buildup.
Diagnosing Connection and App Issues
When experiencing crackling and static noise on your AirPods Pro (Gen 1 & 2), it’s important to diagnose and troubleshoot the connection and app issues that may be causing the problem.
First, ensure that your AirPods are properly connected to your device. Check that Bluetooth is enabled and that your AirPods are paired with your iPhone, iPad, or other compatible device. If the issue persists, try resetting your AirPods by following these steps:
1. Reset AirPods:
– Go to the Settings app on your device.
– Tap Bluetooth.
– Locate your AirPods in the list of devices and tap the “i” icon next to them.
– Select Forget This Device and confirm.
– Place your AirPods back in the case and close the lid.
– Wait a few seconds, then open the lid and press and hold the setup button on the back of the case until the LED light on the front starts flashing white.
– Re-pair your AirPods with your device.
If the crackling and static noise persists after resetting, try updating your device’s software to the latest version. This can often resolve compatibility issues between the AirPods and your device.
2. Update Device Software:
– Go to the Settings app on your device.
– Tap General.
– Select Software Update.
– If an update is available, follow the prompts to download and install it.
If the issue still persists, try using your AirPods with a different device to determine if the problem is specific to your device or the AirPods themselves. If the crackling and static noise persists across multiple devices, it may be necessary to contact Apple Support for further assistance or consider getting your AirPods repaired or replaced.
Frequently Asked Questions
Why are my AirPods crackling?
Your AirPods may be crackling due to various reasons. Firstly, ensure that your connected device, whether it’s an iPhone, iPad, iPod touch, or Mac, has the latest software update installed. Additionally, make sure that there are no wireless interferences or obstructions between your device and the AirPods. To further troubleshoot, try playing audio from a different app to determine if the issue persists.
Will Apple replace my AirPods if they are crackling?
Apple will replace your AirPods if they are crackling.
Why is my left AirPod making a static sound?
Your left AirPod may be making a static sound due to a performance or connection issue with the device it’s paired with. Interference, a weak Bluetooth connection, or a problem with the AirPod battery can also be potential causes.
Why do my AirPods make a noise randomly?
Your AirPods may make a noise randomly due to certain instances, such as when they are being charged or if the battery charge is low.
