Are you encountering Service Control Manager Error 7001 on your Windows device? Read on to discover effective solutions for fixing this error.
Optimize System Performance
1. Check for File System Fragmentation: Defragment your hard drive to improve system performance. Use the built-in Windows tool or a third-party defragmentation tool.
2. Disable Unnecessary Startup Programs: Open the Start menu and type “msconfig” to access the System Configuration utility. Go to the “Startup” tab and uncheck any unnecessary programs that are set to run at startup.
3. Update Drivers: Outdated or incompatible drivers can cause system errors. Go to the manufacturer’s website and download the latest drivers for your hardware.
4. Scan for Malware: Run a full system scan with your antivirus software to check for any malware or viruses that may be causing the error.
5. Check Internet Protocol Settings: Ensure that your Internet Protocol (IP) settings are configured correctly. Open the Control Panel, go to Network and Internet, and then Network and Sharing Center. Click on your network connection and then click on Properties. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties. Make sure that the settings are set to obtain an IP address automatically.
6. Perform a Clean Boot: A clean boot can help identify software conflicts that may be causing the error. Press Windows key + R to open the Run dialog box. Type “msconfig” and click on OK. Go to the Services tab and check the “Hide all Microsoft services” box. Click on Disable all and restart your computer.
7. Check for Windows Updates: Keeping your operating system up to date can help resolve known issues and improve system performance. Go to Settings > Update & Security > Windows Update and click on Check for updates.
8. Optimize Windows Services: Open the Services window by pressing Windows key + R, typing “services.msc” and clicking OK. Review the services listed and disable any unnecessary ones by right-clicking on them and selecting Properties. Change the Startup type to Disabled.
Remember to restart your computer after making any changes to apply the modifications.
Adjust Network Discovery Dependencies
1. Open the Control Panel by clicking the Start menu and selecting “Control Panel.”
2. In the Control Panel, locate the “Network and Sharing Center” and click on it.
3. Within the Network and Sharing Center, click on “Change advanced sharing settings” in the left-hand menu.
4. Scroll down to the “Network discovery” section and click on the “Turn on network discovery” option.
5. Next, click on the “Choose media streaming options” link located below the network discovery settings.
6. In the Media Streaming Options dialog box, click on the “Turn on media streaming” button.
7. A list of devices will appear. Choose the device you want to allow access to your media files and click on the “Allow” button.
8. Click “OK” to save the changes and close the dialog box.
9. Finally, restart your computer to apply the changes.
By adjusting the network discovery dependencies, you should be able to resolve the Service Control Manager Error 7001 on Windows 10. This error occurs when there is a problem with the network discovery settings, preventing proper communication between devices on the network.
Utilize System Restore
1. Press the Windows key + R to open the Run dialog box.
2. Type “rstrui” and press Enter to open System Restore.
3. In the System Restore window, click “Next” to proceed.
4. Select a restore point that predates the appearance of the error and click “Next.”
5. Review the information on the Confirm your restore point screen and click “Finish” to start the restoration process.
6. Your computer will restart, and the system will be restored to the selected restore point.
7. After the restoration is complete, check if the Service Control Manager Error 7001 is resolved.
If the error persists or if you’re unable to access System Restore, try the following:
1. Open the Command Prompt as an administrator by pressing the Windows key + X and selecting “Command Prompt (Admin).”
2. Type the following command: “sfc /scannow” and press Enter. This will scan and repair any corrupted system files.
3. Restart your computer and check if the error is resolved.
If the issue still persists, you may need to consider other troubleshooting methods or seek further assistance from the Windows community or a professional technician.
Remember, System Restore is a useful tool to fix various system-related errors, but it is important to create regular restore points and keep your system updated to avoid encountering such issues in the future.
[Note: If you are unsure about performing any of the steps mentioned above, it is recommended to consult a professional or seek guidance from reliable sources.]
Manage Net.tcp Port Sharing
Step | Description |
---|---|
Step 1 | Open the Services console by pressing Windows key + R, then type “services.msc” and hit Enter. |
Step 2 | Scroll down and locate the “Net.Tcp Port Sharing Service” in the list of services. |
Step 3 | Right-click on the service and select “Properties”. |
Step 4 | In the Properties window, go to the “General” tab. |
Step 5 | Change the “Startup type” to “Automatic” if it’s not already set. |
Step 6 | Click on the “Start” button to start the service. |
Step 7 | Click “Apply” and then “OK” to save the changes. |
Step 8 | Restart your computer for the changes to take effect. |
Frequently Asked Questions
What is error code 7011?
Error code 7011 indicates a network connectivity issue with the TV box. If the TV box has been recently installed, it is recommended to wait for an additional 30 minutes.
How do I fix event ID 7011?
To fix event ID 7011, you can follow these steps:
1. Click the Start button.
2. Click Run.
3. Type regedit.
4. Click OK.
5. In the Registry Editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
6. Locate the ServicesPipeTimeout entry in the details pane.
7. Right-click the entry.
8. Select Modify.
What is event ID 7001 IP helper?
Event ID 7001 IP helper is an error message indicating that the TCP/IP NetBIOS Helper Service is dependent on the NetBIOS over TCP/IP service, which failed to start due to an error. This error may occur if the service is disabled or if there are no enabled devices associated with it.
How do I fix Service Control Manager?
To fix Service Control Manager, you can try the following solutions:
1. Check the Event Viewer Logs.
2. Set the Startup Type to Automatic.
3. Restart the Service Login Settings.
4. Tweak the Service Logon User in Policy Editor.
![Zachary Connibere](https://internetexplorerwindows10.com/wp-content/uploads/zacharyconnibere.png)