Firewall Blocking Internet Access

Firewall blocking internet access can be a frustrating issue for users, hindering their ability to connect and browse the web.

Check firewall settings: Ensure that your firewall settings are not overly restrictive and are allowing necessary internet traffic. Review the rules and permissions in your firewall configuration to ensure that it is not blocking essential services or websites.

Reset Network and Firewall Settings

1. Open the Control Panel on your Windows computer. You can do this by clicking the Start button, searching for “Control Panel,” and selecting it from the results.

2. In the Control Panel, locate and click on the “Network and Internet” category.

3. Next, click on “Network and Sharing Center.”

4. In the Network and Sharing Center, you will see a list of connections. Click on the one you are currently using, such as Wi-Fi or Ethernet.

5. A new window will open. Click on the “Properties” button.

6. In the Properties window, scroll down and locate the “Internet Protocol Version 4 (TCP/IPv4)” entry. Select it and click on the “Properties” button.

7. In the TCP/IPv4 Properties window, select the option to obtain an IP address automatically and obtain DNS server address automatically. Click “OK” to save the changes.

8. Now, go back to the Network and Sharing Center window and click on “Change adapter settings” on the left-hand side.

9. Right-click on your active network connection and select “Disable.”

10. After a few seconds, right-click on the same network connection again and select “Enable.”

11. This will reset your network settings.

12. To reset your firewall settings, press the Windows key + R to open the Run dialog box. Type “control firewall.cpl” and press Enter.

13. In the Windows Firewall window, click on “Restore defaults” in the left-hand menu.

14. Confirm the action by clicking “Yes” when prompted.

15. Your firewall settings will now be reset to their default configuration.

16. Finally, restart your computer to apply the changes.

Following these steps should help resolve any issues with your network and firewall settings, allowing you to regain internet access.

Run Troubleshooter for Network and Firewall

If you are experiencing issues with your internet access due to your firewall, you can run the troubleshooter to help diagnose and fix the problem. The troubleshooter is a built-in tool in Windows that can automatically detect and resolve common network and firewall issues.

To run the troubleshooter, follow these steps:

1. Open the Control Panel by pressing the Windows key + X and selecting “Control Panel” from the menu.

2. In the Control Panel, click on “System and Security” and then select “Troubleshoot common computer problems” under the “Security and Maintenance” section.

3. In the Troubleshooting window, click on “Network and Internet” and then select “Internet Connections” from the list.

4. Click on “Next” to start the troubleshooter. It will automatically scan your system for any network and firewall issues.

5. Follow the on-screen instructions to complete the troubleshooting process. The troubleshooter may suggest different solutions, such as resetting your network adapter or adjusting your firewall settings.

6. Once the troubleshooter has finished, check if your internet access has been restored. If not, you may need to further investigate other possible causes or seek additional assistance.

By running the troubleshooter for network and firewall issues, you can quickly identify and resolve any problems that may be blocking your internet access.

Temporarily Disable Security Software

To temporarily disable your security software, follow these steps:

1. Click on the “Start” button on your computer’s desktop and select “Control Panel” from the menu.

2. In the Control Panel, locate and click on the “Security” or “Security and Maintenance” option.

3. Look for your antivirus or firewall software in the list of installed programs and double-click on it to open the settings.

4. Within the software settings, navigate to the section that allows you to disable or turn off the protection temporarily.

5. Click on the option to disable or turn off the firewall or antivirus software. Confirm any prompts or warnings that may appear.

6. Once the security software is disabled, try accessing the internet again to see if the firewall blocking issue is resolved.

7. After troubleshooting, don’t forget to re-enable your security software to protect your computer from malware and other threats. Simply follow the same steps and select the option to enable or turn on the protection.

import iptc # Requires iptables-py library

def block_internet_access(ip_address):
# Create a new rule and chain
rule = iptc.Rule()
rule.in_interface = "eth0" # Specify the network interface to block internet access for

target = iptc.Target(rule, "DROP") # Drop packets matching the rule = target

# Match packets with the specified source IP address
match = rule.create_match("ip")
match.src = ip_address

# Append the rule to the OUTPUT chain of the filter table
chain = iptc.Chain(iptc.Table(iptc.Table.FILTER), "OUTPUT")

# Commit the changes

# Usage example

Note: The code above uses the `iptc` library, which is a Python wrapper for manipulating iptables rules. This code snippet demonstrates how to block internet access for a specific IP address (``) by inserting a DROP rule into the OUTPUT chain of the filter table.

Check and Update Network Drivers

1. Open the Device Manager. Right-click on the Start button and select “Device Manager” from the context menu.

2. In the Device Manager window, expand the “Network adapters” category to see the list of network drivers installed on your computer.

3. Look for any drivers with a yellow exclamation mark or a red “X” icon. These indicate that there may be an issue with the driver.

4. Right-click on the problematic driver and select “Update driver” from the dropdown menu.

5. Choose the option to automatically search for updated driver software. Windows will then search for the latest driver version and install it if available.

6. If Windows is unable to find an updated driver, you can manually download the latest driver from the manufacturer’s website. Visit their support page, locate your model, and download the appropriate driver for your operating system.

7. Once the updated driver is installed, restart your computer to apply the changes.

By updating your network drivers, you can resolve issues related to your firewall blocking internet access. This ensures that your computer can connect to the internet and browse the web without any interruptions.

Restore System and Firewall to Default Settings

To restore your system and firewall to default settings, follow these steps:

1. Open the Control Panel on your Windows computer. You can do this by clicking on the Start button and typing “Control Panel” in the search bar. Then, click on the Control Panel app.

2. In the Control Panel, locate and click on the “System and Security” option.

3. Within the “System and Security” section, find and click on the “Windows Firewall” option.

4. In the Windows Firewall settings, you will see an option called “Restore defaults.” This option will reset your firewall settings to their original state.

5. Click on the “Restore defaults” option and confirm your action when prompted.

6. Once you have restored the firewall settings, it is recommended to restart your computer. This will ensure that the changes take effect.

7. After rebooting, you can check if the firewall blocking internet access issue has been resolved. Try accessing websites or using online services to confirm.

If you are still experiencing issues with your internet access, it may be necessary to seek further assistance from your internet service provider or a computer technician.

Frequently Asked Questions

How do I unblock internet access from my firewall?

To unblock internet access from your firewall, you can navigate to the Control Panel, then System and Security, and finally Windows Defender Firewall. From there, you can turn off the firewall. After restarting your system, you can open a browser to check if the blocked access for the internet has been resolved.

How do I remove internet blocking firewall?

To remove an internet blocking firewall, you can follow these steps:

1. Press Windows + S and type Windows firewall.
2. Select Windows Defender Firewall from the search result.
3. Click Restore defaults in the left pane.
4. Click on the Restore defaults button again.
5. Click Yes to confirm.

How can I tell if my firewall is blocking the internet?

To determine if your firewall is blocking the internet, you can check the outbound rules in the Windows Firewall settings on Windows. On a Mac, you can examine the firewall settings by going to System Preferences, selecting Network, and then Firewall Options.

How do I fix my internet firewall?

To fix your internet firewall, you can follow these steps:

1) Ping a PC near the device.
2) Ping the device.
3) Telnet and/or browse to the device.
4) Confirm the port configuration of the device.
5) Confirm that important IP addresses are not blocked.
6) Trace the route to the device.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top