Solutions for iPhone’s Low Call Volume Issue

Are you struggling with low call volume on your iPhone? Discover effective solutions to this frustrating issue.

Causes of Low Volume Issues

Volume control icon.

There are several factors that can contribute to low call volume on your iPhone. Here are some common causes:

1. Dirty or blocked speaker: Over time, dust, lint, or other debris can accumulate in the speaker ports, affecting the sound quality. Make sure to clean the speaker carefully using a soft, lint-free cloth. Avoid using any liquids or sharp objects that could damage the speaker.

2. Software glitches: Occasionally, software issues can cause low call volume. To troubleshoot this, try restarting your iPhone by holding down the power button and sliding to power off. Then, turn it back on after a few seconds. If the problem persists, try updating your iOS to the latest version.

3. Bluetooth interference: If you have connected your iPhone to a Bluetooth device, such as headphones or a car audio system, it could affect the call volume. Try disconnecting from Bluetooth and see if the issue is resolved.

4. Call volume settings: It’s possible that the call volume settings on your iPhone are set too low. To check and adjust the call volume, follow these steps:

– During a call, use the volume buttons on the side of your iPhone to increase the volume.
– If the volume is already at maximum, go to Settings > Sounds & Haptics > Ringer and Alerts and make sure the volume slider is all the way up.
– Additionally, make sure the “Change with Buttons” option is enabled under Settings > Sounds & Haptics.

5. Hardware malfunction: In rare cases, a hardware issue could be causing the low call volume. If none of the above solutions work, it may be necessary to visit an Apple Store or authorized service provider for further assistance.

Adjusting Call Volume Settings

To adjust the call volume settings on your iPhone, follow these simple steps:

1. Start by accessing the Settings app on your iPhone. You can find it on your home screen, represented by a gray icon with gears.

2. Within the Settings menu, scroll down and tap on “Sounds & Haptics.” This option is usually located towards the top of the menu.

3. Once you’re in the Sounds & Haptics menu, locate the “Ringer and Alerts” section. Under this section, you’ll find the “Call Audio Routing” option.

4. Tap on “Call Audio Routing” to open the call volume settings. Here, you can choose between “Automatic” and “Speaker.”

5. If you want your iPhone to automatically adjust the call audio based on the device you’re using, select the “Automatic” option. This means that if you’re using headphones, the call audio will be directed through the headphones, and if you’re not using any external audio devices, it will play through the iPhone’s built-in speaker.

6. On the other hand, if you want to manually control the call audio routing, select the “Speaker” option. This will ensure that the call audio is always played through the iPhone’s speaker, regardless of any connected headphones or external audio devices.

7. Once you’ve made your selection, exit the Settings app and test the call volume. If you’re still experiencing low call volume, try adjusting the volume using the physical buttons on the side of your iPhone. Increase the volume by pressing the “+” button or decrease it by pressing the “-” button.

Remember, if you’re using headphones or a headset, make sure they are properly connected to your iPhone. If you’re still facing issues with call volume, try troubleshooting your device or contacting Apple support for further assistance.

Cleaning the Speaker Slot and Receiver

Over time, the speaker slot and receiver of your iPhone can accumulate dirt, lint, and dust, which can affect the call volume. Cleaning these components can help improve the sound quality during calls. Here’s how:

1. Start by turning off your iPhone. This will prevent any accidental damage while cleaning.

2. Using a clean, soft-bristled brush or a toothbrush, gently brush the speaker slot and receiver to remove any visible dirt or lint. Be careful not to apply too much pressure, as it may damage the components.

3. For stubborn dirt or debris, you can use a can of compressed air to blow it away. Hold the can upright and use short bursts of air to avoid damaging the speaker or receiver.

4. If there are any visible smudges or stains on the speaker slot or receiver, you can lightly dampen a microfiber cloth with water or isopropyl alcohol. Gently wipe the affected areas to remove the dirt or stains.

5. After cleaning, let the speaker slot and receiver dry completely before turning on your iPhone.

Utilizing Speaker Mode and Bluetooth Settings

Bluetooth speaker icon

1. Speaker Mode: When facing low call volume, activating Speaker Mode can significantly enhance the audio output. To do this, simply follow these steps:
– During a call, locate the Speaker icon on the call screen.
– Tap on the icon to activate Speaker Mode.
– Position your iPhone appropriately to ensure clear sound projection.

2. Bluetooth Settings: Connecting your iPhone to a Bluetooth device can also help boost call volume. Follow these steps to set up a Bluetooth connection:
– Open the Settings app on your iPhone.
– Tap on the Bluetooth option to access the Bluetooth settings.
– Toggle the Bluetooth switch to enable it.
– Pair your iPhone with a compatible Bluetooth device, such as Apple headphones or a headset.
– Once connected, make a call and the audio should be amplified through the Bluetooth device.

Utilizing these features can be particularly useful in various scenarios, such as when you’re in a noisy environment or need to have a hands-free conversation. By activating Speaker Mode or connecting to a Bluetooth device, you can substantially improve your call volume experience.

Remember, if you encounter any difficulties with either Speaker Mode or Bluetooth connections, it’s recommended to troubleshoot the issue. You can try the following steps:
– Ensure that your iPhone’s software is up to date.
– Restart your iPhone to refresh the system.
– Check for any lint or debris in the audio ports, as this can affect the sound quality.
– If using a Bluetooth device, make sure it is sufficiently charged and within range.

Turning Off Phone Noise Cancellation

If you’re experiencing low call volume on your iPhone, one possible solution is to turn off phone noise cancellation. This feature is designed to reduce background noise during calls, but it can sometimes affect the overall call volume. Here’s how you can disable it:

1. Open the Settings app on your iPhone.
2. Scroll down and tap on “Accessibility.”
3. In the Accessibility menu, tap on “Audio/Visual.”
4. Under the Hearing section, you’ll find the “Phone Noise Cancellation” option.
5. Tap on the switch next to it to turn it off. This will disable the noise cancellation feature.

By turning off phone noise cancellation, you may notice an improvement in call volume, as the feature will no longer actively reduce background noise. However, keep in mind that this may result in louder ambient noise during calls.

If you’re still experiencing low call volume after disabling noise cancellation, there may be other factors at play. It’s worth troubleshooting your iPhone’s audio settings and checking for any software updates that could address the issue.

Remember, this solution specifically addresses the low call volume problem on your iPhone. If you’re facing similar issues while using Apple headphones, FaceTime, iPod Touch, iPad, or a headset, this solution may still help. However, if the problem persists, it’s advisable to seek further assistance from Apple support or visit an authorized service center.

Alternative Methods and Professional Solutions

  • Adjust the volume settings on your iPhone
  • Check for any software updates available
  • Try using a headset or earphones to make calls
  • Clean the speaker grill and receiver to remove any dirt or debris
    Try using a headset or earphones to make calls
Clean the speaker grill and receiver to remove any dirt or debris
  • Reset all settings on your iPhone
  • Visit an Apple Store or authorized service provider for assistance
  • Consider using a third-party volume booster app
  • Contact Apple Support for further troubleshooting steps

Seeking Assistance from Apple Support

1. Visit the Apple Support website: Start by visiting the official Apple Support website at []( This website is a valuable resource for troubleshooting and finding solutions for various Apple products, including iPhones.

2. Select your device: Once you’re on the Apple Support website, select your device from the options provided. In this case, choose your iPhone model to ensure that you access the relevant support information.

3. Browse support articles: Apple Support provides a wide range of articles that cover different topics related to iPhone issues. Look for articles specifically addressing low call volume problems or related audio issues. These articles often contain helpful instructions and troubleshooting steps.

4. Contact Apple Support: If you can’t find a suitable solution through the articles, it’s time to reach out to Apple Support directly. You can do this by selecting the “Contact Support” option on the website. This will give you various contact options, such as phone support, live chat, or scheduling a call with an Apple expert.

5. Explain the issue: When contacting Apple Support, clearly describe the low call volume problem you’re facing on your iPhone. Provide any relevant details, such as when the issue started, whether it occurs during specific calls or with all calls, and any troubleshooting steps you’ve already attempted.

6. Follow Apple Support’s instructions: Depending on your specific issue, Apple Support may guide you through a series of troubleshooting steps. Follow these instructions carefully, as they are tailored to address the low call volume problem. Make sure to mention if you have already tried any troubleshooting steps mentioned in the support articles.

7. Consider repair options: If the issue persists despite following the troubleshooting steps, Apple Support may recommend repair options. They can assist you in finding an authorized service provider or help you set up a repair appointment at an Apple store.

Seeking assistance from Apple Support is a reliable way to resolve low call volume issues on your iPhone. Their expertise and knowledge of Apple products can ensure that you receive the necessary guidance and solutions to improve your call experience.


Why can I barely hear on my iPhone during calls?

Your iPhone may have a low in-call volume due to various reasons, such as accidental toggling of the volume rocker, obstructions hindering clear audio, or potential software or hardware issues.

Why is my iPhone speaker not as loud as it used to be?

Your iPhone speaker may not be as loud as it used to be due to blockage or dirt in the speaker opening or receiver. Try removing any screen protectors, films, or cases and clean the speaker or receiver opening with a small, soft-bristled brush if necessary.

Why is my in call volume so low?

Your in-call volume may be low due to several reasons. It could be because your phone is connected to a Bluetooth device that is playing sound, there might be an app running in the background controlling the overall volume, Do Not Disturb Mode might be enabled, or there could be hardware issues with your speakers or headphones.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top