Windows Booting into Automatic Repair Loop – Quick Fix

Having your Windows constantly booting into an automatic repair loop can be frustrating and time-consuming. However, there are quick fixes available that can help resolve this issue.

Symptoms and Causes of the Loop

Blue screen of death

Symptoms of the Loop:

When your Windows system gets stuck in an automatic repair loop, you may experience a few common symptoms. One of the most obvious signs is that your computer continuously restarts and fails to boot into the operating system. You may see error messages indicating that your PC needs to be repaired or that there was a problem with the startup. Another symptom is the appearance of the blue screen of death (BSOD), which can provide more specific error codes.

Causes of the Loop:

Understanding the causes of the automatic repair loop can help you find a quick fix. One possible cause is a corrupted system file or a faulty update. When the system detects an error during the startup process, it triggers the automatic repair feature to try and fix it. However, if the repair process fails or gets interrupted, it can result in a loop.

Another cause could be an issue with the boot configuration data (BCD). The BCD contains important information about how your system boots, and if it gets corrupted or misconfigured, it can lead to the automatic repair loop. Similarly, a problem with the hard drive, such as bad sectors or file system errors, can also trigger the loop.

Quick Fix:

To break free from the automatic repair loop and get your Windows system back up and running, you can try the following steps:

1. Restart your computer and repeatedly press the F8 key to access the Advanced Boot Options menu. From there, select “Safe Mode” to boot into a limited version of Windows.

2. Once in Safe Mode, open the command prompt by pressing the Windows key + R, typing “cmd,” and hitting Enter.

3. In the command prompt, type “bcdedit /set {default} recoveryenabled No” and press Enter. This command disables the automatic repair feature.

4. Restart your computer and see if it boots normally. If it does, the automatic repair loop should no longer occur.

If the above steps don’t work, you can also try restoring your system to a previous working state using System Restore or performing a startup repair using the Windows installation media.

Remember to back up your important files before attempting any troubleshooting steps to avoid potential data loss.

Effective Solutions for Repair

  • Check for hardware issues: Ensure that all hardware components are properly connected and functional.
  • Boot into Safe Mode: Restart the computer and access Safe Mode to troubleshoot startup issues.
  • Use System Restore: Restore the system to a previous working state using a restore point.
  • Run Automatic Repair: Utilize the built-in Automatic Repair tool to fix common startup problems.
  • Perform Startup Repair: Run the Startup Repair tool to scan and repair issues preventing Windows from starting.
  • Disable Automatic Restart: Stop the automatic restart loop to view any error messages displayed.
  • Check for disk errors: Use the Command Prompt or third-party software to scan and repair disk errors.
  • Update drivers: Ensure all device drivers are up to date to avoid conflicts and compatibility issues.
  • Scan for malware: Run a thorough antivirus scan to detect and remove any malicious software.
  • Reinstall Windows: As a last resort, reinstall Windows to fix persistent booting issues.

Data Recovery Strategies

First, try booting into Safe Mode. To do this, restart your computer and press the F8 key repeatedly before the Windows logo appears. This will bring up the Advanced Boot Options menu. From there, select Safe Mode and see if your computer boots successfully. If it does, you can back up your important files and then proceed with troubleshooting.

If Safe Mode doesn’t work, you can try using the System Restore feature. Restart your computer and press the F8 key again to access the Advanced Boot Options menu. This time, select “Repair Your Computer” and choose “System Restore” from the options. Follow the prompts to restore your computer to a previous working state.

If System Restore fails or is not available, you can try using the Command Prompt to fix the issue. Restart your computer and press the F8 key to access the Advanced Boot Options menu. Select “Repair Your Computer” and then choose “Command Prompt”. In the Command Prompt window, type “chkdsk /f” and press Enter to run a disk check. This may fix any errors on your hard drive and allow your computer to boot normally.

If none of these strategies work, you may need to consider reinstalling Windows. This will erase all your data, so it’s important to have a backup beforehand. Restart your computer and press the F8 key to access the Advanced Boot Options menu. Select “Repair Your Computer” and then choose “Troubleshoot”. From there, select “Reset this PC” and follow the prompts to reinstall Windows.

Remember, these strategies are meant to help you recover your data and get your computer working again. If you’re unsure or uncomfortable performing these steps, it’s always best to seek professional assistance.

Summary and Preventative Measures


If your Windows is stuck in an automatic repair loop, there are a few quick fixes you can try before resorting to more drastic measures. This article will provide a concise summary of the issue and suggest preventative measures to avoid it in the future.

Preventative Measures:

1. Disable Automatic Restart: To prevent your Windows from entering the automatic repair loop, you can disable the automatic restart feature. This will allow you to see any error messages before your system attempts to repair itself. To do this, follow these steps:
a. Press the Windows key + R to open the Run dialog box.
b. Type “sysdm.cpl” and press Enter to open the System Properties window.
c. Go to the Advanced tab and click on the Settings button under Startup and Recovery.
d. Uncheck the box next to “Automatically restart” under System Failure.
e. Click OK to save the changes.

2. Check for Malware: Viruses and malware can sometimes cause Windows to enter the automatic repair loop. It’s important to regularly scan your system with a reliable antivirus software to detect and remove any malicious programs. Additionally, be cautious when downloading files or visiting suspicious websites.

3. Keep Windows Updated: Regularly updating your Windows operating system is crucial for security and stability. Microsoft often releases patches and fixes that address various issues, including those related to the automatic repair loop. Enable automatic updates or regularly check for updates manually by going to Settings > Update & Security > Windows Update.

4. Repair Disk Errors: Disk errors can also trigger the automatic repair loop. To check and repair disk errors, follow these steps:
a. Press the Windows key + X and select Command Prompt (Admin).
b. In the command prompt, type “chkdsk C: /f” (without quotes) and press Enter. Replace “C” with the drive letter where your Windows is installed if necessary.
c. Wait for the process to complete and follow any instructions if prompted.

5. System Restore or Reset: If all else fails, you can try using the System Restore feature or perform a system reset to resolve the automatic repair loop issue. However, these options may cause data loss, so it’s important to back up your files before proceeding.


How do I get out of startup repair?

To get out of startup repair, you can try disabling the Automatic Startup Repair by entering the command “bcdedit /set {default} recoveryenabled No” in Command Prompt. After that, restart your PC and you should be able to access Windows 10 again.

Why does Windows 10 keep booting into recovery mode?

Windows 10 keeps booting into recovery mode due to outdated drivers on the device. To resolve this issue, update the drivers to the latest version.

How do I get my Windows out of automatic repair?

To get your Windows out of automatic repair, you can try the following steps:
– Run Fixboot and Chkdsk Commands
– Perform a System Scan in Safe Mode
– Restore the Windows Registry
– Disable the Automatic Repair Tool
– Disable Early Launch Anti-Malware
– Perform a Hard Reboot

Why does my computer keep booting to automatic repair?

Your computer may keep booting to automatic repair due to various reasons such as missing or corrupted system files, issues with Windows Registry, incompatible hard drives, file corruption in Windows Boot Manager, or a faulty Windows update.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top