Experiencing the “Access Denied” error 0x80070005 while trying to use System Restore? Here’s how I resolved it.
Temporarily Disable Antivirus Programs
To fix the System Restore Access Denied Error 0x80070005, it may be necessary to temporarily disable your antivirus programs. Antivirus software can sometimes interfere with the system restore process, causing this error to occur.
To disable your antivirus program, follow these steps:
1. Right-click on the antivirus icon in the system tray or notification area.
2. Select the option to “Disable” or “Turn off” the antivirus program.
3. If prompted, choose a time frame for the antivirus to remain disabled. Select the longest duration available to ensure it stays disabled while you fix the error.
4. If you have multiple antivirus programs installed, repeat the steps for each one.
Note: Disabling your antivirus software temporarily leaves your computer vulnerable to malware and other threats. Be sure to re-enable it as soon as you have resolved the System Restore Access Denied Error.
After disabling your antivirus, attempt to perform the system restore again to see if the error has been resolved. If not, you may need to explore other solutions.
Remember to re-enable your antivirus software once you have finished troubleshooting the error. This will help ensure that your computer remains protected against viruses and other malicious software.
By temporarily disabling your antivirus programs, you can eliminate any potential conflicts that may be causing the System Restore Access Denied Error 0x80070005.
Execute System Restore in Safe Mode
1. Start by booting your computer into Safe Mode. To do this, press the Windows key + R to open the Run dialog box. Type “msconfig” and press Enter. In the System Configuration window, go to the Boot tab and check the “Safe boot” option. Click OK and restart your computer.
2. After your computer restarts in Safe Mode, press the Windows key + R again to open the Run dialog box. Type “sysdm.cpl” and press Enter to open the System Properties window.
3. In the System Properties window, go to the System Protection tab and click on the “System Restore” button. This will open the System Restore window.
4. In the System Restore window, click on the “Next” button to proceed. You will see a list of available restore points. Select a restore point that was created before the Access Denied Error occurred and click on the “Next” button.
5. On the next screen, review the selected restore point and click on the “Finish” button to start the System Restore process.
6. Wait for the process to complete. Your computer will restart once the System Restore is finished.
Note: If you still encounter the Access Denied Error while performing System Restore in Safe Mode, you may need to adjust the file-system permissions for the System Volume Information folder. This folder is where the restore points are stored.
Adjust User Permissions for Full Control
- Open the Command Prompt as an administrator.
- Run the command “net user” to list all user accounts on the system.
- Identify the user account for which you want to adjust permissions.
- Run the command “net localgroup administrators [username] /add” to add the user to the administrators group.
- Restart your computer for the changes to take effect.
- Access the System Restore settings by pressing the Windows key + R, then typing “sysdm.cpl” and pressing Enter.
- Click on the System Protection tab and select the drive you want to configure.
- Click the Configure button.
- Select the option “Restore system settings and previous versions of files”.
- Apply the changes and click OK.
Utilize the SubInACL Tool for Access Issues
To fix the System Restore Access Denied Error 0x80070005, you can utilize the SubInACL tool. This tool is designed to help with access issues on Microsoft Windows systems. Here’s how you can use it:
1. Download and install the SubInACL tool from the official Microsoft website.
2. Open a command prompt with administrative privileges by pressing Win + X and selecting “Command Prompt (Admin)” from the menu.
3. In the command prompt, navigate to the directory where you installed the SubInACL tool.
4. Use the following command to reset the permissions for the System Volume Information folder:
subinacl /subdirectories “%windir%\system32\config\systemprofile\AppData\Local\Application Data” /grant=”NT AUTHORITY\SYSTEM”=f
5. Next, use the following command to reset the permissions for the System Restore files and folders:
subinacl /subdirectories “%windir%\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\System32\config\systemprofile” /grant=”NT AUTHORITY\SYSTEM”=f
6. Finally, run the following command to reset the permissions for the registry keys associated with System Restore:
subinacl /subkeyreg “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SPP” /grant=”NT AUTHORITY\SYSTEM”=f
7. Once the commands have executed successfully, restart your computer and try running System Restore again.
By using the SubInACL tool, you can resolve access denied errors and regain control over the System Restore feature on your Windows system.
Reset Windows Components with DISM Tool
To fix the “System Restore Access Denied Error 0x80070005” issue, you can use the DISM (Deployment Image Servicing and Management) tool to reset Windows components. This tool is a command-line interface utility provided by Microsoft Windows that allows you to repair corrupted system files and restore the operating system to a stable state.
Here’s how you can use the DISM tool to fix the error:
1. Open a command prompt with administrative privileges. You can do this by right-clicking on the Start menu and selecting “Command Prompt (Admin)” or “Windows PowerShell (Admin)” from the context menu.
2. In the command prompt window, type the following command and press Enter:
dism /online /cleanup-image /restorehealth
3. The DISM tool will now scan your system for any corrupted files and attempt to repair them. This process may take some time, so be patient and do not interrupt it.
4. Once the repair process is complete, restart your computer and check if the “System Restore Access Denied Error 0x80070005” issue has been resolved.
Using the DISM tool can help restore your system’s functionality by repairing any corrupted or missing files. It is a useful tool to have in your arsenal when dealing with system errors and can help you maintain a stable and reliable operating system.
Check and Correct Date and Time Settings
1. Open the Control Panel by pressing the Windows key + R, typing “control“, and hitting Enter.
2. In the Control Panel, click on “Clock and Region” and then “Date and Time”.
3. In the Date and Time settings window, make sure the date and time are correct. If not, click on “Change date and time” and adjust the settings accordingly.
4. Next, click on the “Internet Time” tab and then “Change settings”.
5. Check the box next to “Synchronize with an Internet time server” and select a server from the drop-down menu. Click “Update now” and then “OK”.
6. Finally, click “Apply” and then “OK” to save the changes.
By ensuring that your computer’s date and time settings are accurate, you can prevent various errors, including the System Restore Access Denied Error 0x80070005.
Perform a Cloud-Based Reset of Your PC
Performing a cloud-based reset of your PC can help fix the System Restore Access Denied Error 0x80070005. This method allows you to reset your PC and reinstall Windows while keeping your personal files intact.
To perform a cloud-based reset, follow these steps:
1. Open the Start menu and click on the “Settings” icon.
2. In the Settings menu, click on “Update & Security.”
3. Select the “Recovery” option from the left-hand menu.
4. Under the “Reset this PC” section, click on “Get started.”
5. Choose the “Cloud download” option.
6. Follow the on-screen instructions to complete the reset process.
Note: This method requires a stable internet connection, as it downloads a fresh copy of Windows from the cloud. Make sure you have a reliable connection before starting the process.
Performing a cloud-based reset can help resolve various system issues, including the Access Denied Error 0x80070005. It reinstalls a clean version of Windows, removing any corrupt or conflicting files that may be causing the error.
Remember to back up your important files before performing a reset, as the process will remove all installed applications and settings.
After the reset is complete, you can reinstall your applications and restore your files from the backup. This should help resolve the Access Denied Error 0x80070005 and improve the overall performance of your PC.
If you continue to encounter the error after performing a cloud-based reset, it may be advisable to seek further assistance from a professional or contact Microsoft Support for more advanced troubleshooting options.
Run System File Checker (SFC) to Repair Files
To fix the System Restore Access Denied Error 0x80070005, you can try running the System File Checker (SFC) tool. This tool scans and repairs any corrupted or missing system files on your computer.
To run the SFC tool, follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type cmd and press Enter to open the Command Prompt.
3. In the Command Prompt window, type sfc /scannow and press Enter.
4. The tool will start scanning your system files and repair any issues it finds.
5. Wait for the process to complete. This may take some time.
6. Once the scan is finished, restart your computer.
After restarting, check if the System Restore Access Denied Error 0x80070005 is resolved. If the error persists, you may need to try other troubleshooting steps or seek further assistance.
Reset or Reconfigure Windows Update Settings
1. Press the Windows key + R to open the Run dialog box.
2. Type “services.msc” and press Enter to open the Services window.
3. Scroll down and double-click on “Windows Update” to open its properties.
4. In the General tab, click on the “Stop” button to stop the Windows Update service.
5. Next, open File Explorer and navigate to the “C:\Windows\SoftwareDistribution” folder.
6. Delete all the files and folders inside the SoftwareDistribution folder.
7. Go back to the Services window and start the Windows Update service by clicking on the “Start” button.
8. Close the Services window and open the Control Panel.
9. In the Control Panel, click on “System and Security” and then “Windows Update“.
10. Click on “Check for updates” to download and install the latest updates for your system.
This process will reset the Windows Update settings and clear any temporary files that may be causing the access denied error. After completing these steps, you should be able to successfully use System Restore without encountering the 0x80070005 error.
FAQs
What does Error Code 0x80070005 mean?
Error Code 0x80070005 means that the system or user does not have the necessary files or permissions to modify settings during a Windows update.
How do I fix 0x80070005 Access Denied?
To fix the “0x80070005 Access Denied” error, you can try the following solutions:
– Give yourself full permissions.
– Scan for malware and viruses.
– Perform a clean boot.
– Take ownership with Command Prompt.
– Run the Windows Troubleshooter.
– Use SFC (System File Checker).
– Reset permissions with SubInACL.
Why is my system restore not working 0x80070005?
Your system restore may not be working due to the error code 0x80070005, which is often caused by an active antivirus program. To resolve this issue, try disabling your antivirus software.
